COMBIMASS® oem-bio L
  • May 27, 2014

Thermal flow meter for direct measurement of normal volumetric or gas mass flows Flow rate measurement unaffected by pressure and temperature For gas temperatures up to 130°C and gas pressure up to 1,3 bar Pressure-proof aluminium enclosure Compact and rugged design for exceptional reliability Easy to install and service With a 4-20 mA and impulse […]

VACOMASS® control valve
  • May 27, 2014

• Square diaphragm control valve with central or falling flow axis • Range 0 – 100%, gas-tight at closed position • Supplied as a unit with an electrical multi-turn actuator for sensitive control of the air supply • With a low-pressure drop • Valve is optimized for very small steps VACOMASS® control valve is a […]

VACOMASS® simulation
  • May 27, 2014

CFD-flow simulation in the measuring piping section under consideration of piping geometry and details as well as further installations like elbows, T-pieces, and control valves at the inlet and outlet of the flowmeter Calculation of the required length of piping sections Calculation of the pressure drop VACOMASS® simulation presents the results of a 3D-CFD (Computational […]

COMBIMASS® multi
  • May 27, 2014

Designed to build up high-performance multipoint measuring systems easily May be combined with any flow transmitter of the COMBIMASS® series Highly precise flow rate measurement of gases even with short inlet and outlet pipe sections, large nominal diameters or rectangular ducts Redundant gas flow measurement for the purpose of safety precaution or economical control of […]

COMBIMASS® master
  • May 27, 2014

Easy upgrade of any basic COMBIMASS® flow meter to a high-performance measuring system May be combined with any transmitter of the COMBIMASS® series Allows for simultaneous measurement of flow rate and process temperature of gases Free selectable switch points for easy monitoring of flow rate or temperature limits Flow rate measurement of different gases or […]

COMBIMASS® Hot tapping unit
  • May 27, 2014

The flow sensor can be removed during the operation Gastight Removal also at higher temperatures and gas pressures is possible Ball valve also with DVGW-approval available Compact, rugged, reliable, without wear and corrosion-proof Easy installation and maintenance The field transmitters of the COMBIMASS® eco series are suitable for gas flow measurement and cover a wide […]

VACOMASS® calibration
  • May 27, 2014

Calibration is done in a closed loop taking installation situation, piping, pressure and temperature into consideration or in an externally certified Calibration Lab (certification according to DIN ISO 17025 by DAkkS) Scaling is done against custody-transferred equipment Simulation of real piping situation – original pipes of max. length of 12 m can be put into […]

VACOMASS® system electronics
  • May 27, 2014

Various modules for the different control strategies are available Realization of different control strategies possible, starting with a fixed airflow up to load-depending control and distribution of air based on DO-level and NH4-N Easy DIN-rail assembly In the case of a compact VACOMASS® system, the thermal sensor is positioned directly upstream of the control valve. […]

VACOMASS® econtrol
  • May 27, 2014

Permanent monitoring of the opening degree of all control valves in the system Calculates required header pressure and transfers the data to the local PLC or SPC Reduces operation costs in low-load phases without any loss in operation safety in air supply and distribution The VACOMASS® control module is an electronic module, which calculates actual […]

VACOMASS® flexcontrol
  • May 27, 2014

Modular SPC-based universal control electronics with a graphic display in a field housing with flexible customized configuration Thus a control can be realized locally starting with a simple fixed air flow to a load-depending control loop For indoor and outdoor installation VACOMASS® flex control is an SPC-based modular hardware with graphic display and field housing, […]

1 19 20 21