Máy quan trắc nước online ChemScan® mini LowChlor

[columns ] [column size="1/2"]

The new single parameter in-line analyzer family from ASA Analytics utilizes years of ChemScan® experience and proven technology to provide reliable and accurate analysis of water and waste water. This device has been designed from the ground up to reduce maintenance requirements, includes large ID sample tubing to minimize plugging and only needs quarterly reagent refills[/column]

[column size="1/2"]chemscanminipicsmall[/column] [/columns]

[columns ] [column size="1/2"]


  • Automatic Analysis
  • Continuous Output
  • Multiple Data Communication
  • Interface Options[/column]

[column size="1/2"]


Wastewater Effluent [/column] [/columns] [columns ] [column size="1/2"]


  • Automatic Analysis Utilizing
  • Proven Formaldoxime Method
  • Low Maintenance
  • Proven Sample Handling with Large I.D. Flow Paths
  • Simple Field Adjustable
  • Calibration
  • Sample Blank to Eliminate Backgound Interference
  • Automatic Cleaning[/column]
[column size="1/2"]


  • High Reliability
  • Low Capital Cost
  • High Accuracy
  • Low Operating Cost[/column]


Range (as CL2): Accuracy: Cycle Time: Environment: Power: Enclosure: Safety Approval: Sample Requirements:Maintenance: Relay Contacts: Serial Interface: Analog Output: 0.005 - 2.0 ppm 2% of value or 2x detection limit (whichever greater) 5 minutes to 9999 minutes (field programmable) 5 - 50 degrees C 100 - 240 VAC, 50 W NEMA 4x CSA-US 0.5 - 1 Liter/analysis, pressure 2 to 10 psi, <150 mg/L TSS, <60 NTU Reagent replacement every 3 months, pump kit yearly 1 SPDT Concentration, 1 SPDT Programmable RS-232 Isolated 4-20 mA

[columns ] [column size="1/2"]


[/column] [column size="1/2"]


[/column] [/columns]