SCHUCH QUALITY – YOUR ADVANTAGE
Intelligent microprocessor-controlled emergency electronics with integral:
- Electronic ballast EVG
- End-of-life protection” (acc. to the latest standards IEC 60079-7 with 2 safety circuits (test 1 and test 2)
- Multi-function LED with coded indication of function, status and possible failures of the electronics and batteries
Application:Hazardous areas in Zones 1, 21 and 2, 22 as standard illumination or as emergency illumination with self-contained, group or central battery units
Housing: Glass fibre reinforced polyester resin
Diffuser: Clear polycarbonate with internal prisms, hinged and detachable
Gasket: Silicone, foamed
Reflector: White painted sheet steel, hinged and detachable
Central locking system: Operated by ahexagonal box spanner 13mm.
Housing: Glass fibre reinforced polyester resin
Diffuser: Clear polycarbonate with internal prisms, hinged and detachable
Gasket: Silicone, foamed
Reflector: White painted sheet steel, hinged and detachable
Central locking system: Operated by ahexagonal box spanner 13mm.
Disconnect switch: Isolation of all poles when the light fitting is opened. Optical indicator shows the actual position of the switch
Circuit: Twin-channel electronic ballast with “end-of life” protection
Connection terminals: Standard (L1+N+PE; up to 6.0 mm²)
Cable entries: 2 entries M25 x 1.5 (2 cable glands, 1 with blanking plug enclosed)
Through wiring: Standard with looping the mains cable at one end 3 x 2.5mm²(5 wire optional)
Mounting: Side fixing brackets allow direct mounting on to walls or ceilings.
Circuit: Twin-channel electronic ballast with “end-of life” protection
Connection terminals: Standard (L1+N+PE; up to 6.0 mm²)
Cable entries: 2 entries M25 x 1.5 (2 cable glands, 1 with blanking plug enclosed)
Through wiring: Standard with looping the mains cable at one end 3 x 2.5mm²(5 wire optional)
Mounting: Side fixing brackets allow direct mounting on to walls or ceilings.
READ MORE…
CLICK HERE
