Sheet Steel Steep Roof Light Fittings For Particular Hazardous Dust Areas e187/188


Sturdy design of high chemical resistance for application in rough industrial conditions. Reliable, fail-safe and long-life thanks to a special ex-protected ECG with outstanding quality features
“End-of-life swiching-off system” i.e. at the end of its life a fluorescent tube is safely switched off (worldwide first certification acc. to the latest IEC standards IEC 60079-7 with 2 safety circuits test 1 and test 2)
-In compliance with the requirements of over voltage category III (standard = over voltage category II)

5-31-2014 6-43-18 PM

Hazardous areas of Zones 1, 21 and 2, 22, especially for dust hazardous areas of Zones 21/22
Housing: Sheet steel, powder coated in white (RAL 9016); stainless steel on request
Glass cover: Impact resistant safety glass pane, frameless / hinged
Reflector: Hinged; white painted sheet steel; detachable
Central locking system: Operated by a 5mm allen key, internal aluminium hinges
on the opposite side
Isolating switch: Switching off all poles when the light fitting is opened. Optical  indicator showing the actual position of the switch

Wiring: Double channel ballast, with”end-of-life switching-off sytem”
Connecting terminal: Standard L1 + N+PE, up to 6,0mm2
Cable entries: 3 entries M25 x 1,5 (2 glands, 1 of them with plug and 1 screw plug) LOOP-IN/OUT possible, for some
versions temperature resistant cable is required
Through wiring system: 5 x 2,5mm2 through wiring or preparation for 5-pole
LOOP-IN/OUT at extra charge
Mounting: Horizontal, with 2 eyebolts(included)