Low-Profile Sheet Steel Luminaires e191/192

5-29-2014 6-44-59 PM


  • Sturdy design of high chemical resistance for application in rough industrial conditions
  • Reliable, fail-safe and long-life thanks to special ex-protected quartz sand encapsulated ECG:
  • With high-grade quality features
  • "End-of-life switching-off system" i.e. at life end the fluorescent tube is safely switched off (worldwide first certification acc. to the latest IEC standards IEC 60079-7 with 2 safety circuits test 1 and test 2)
  • In compliance with the requirements of overvoltage category III (standard = overvoltage category II)

Applications: Hazardous areas of Zones 1, 21 and 2,22, e.g. preferably clean rooms, paint spray lines, paint shops and spray booths

Housing: Sheet steel, powder coated in white (RAL 9016), stainless steel upon request

Glass cover: Impact-resistant safety glass, frameless/hinged

Reflector: Surface refined purest aluminum

Isolating switch: Switching off all poles when the light fitting is opened. Optical indicator showing the actual position of the switch

Central locking system: Operated by a 5mm Allen key, hinges on the opposite side

Connection terminals: Standard: 3-pole,up to 2,5mm2 (6,0mm2 on request)

Cable entries: 3 entries M25 x 1,5 (2 glands,1 of them with plug and 1 screw plug)

LOOP-IN/OUT possible, for some versions temperature resistant cable is required

Through wiring system: 5 x 2,5mm2 through wiring or preparation for 5-pole

LOOP-IN/OUT at extra charge

Standard: Facing downwards or forwards

Wiring: Double-channel ballast with "end-of-life" switching-off system

Mounting: Brackets incl. (standard) or separate frame for recessed installation